Skip to content
    New Garage DoorsCommercial DoorsB&D Commercial Roller Doors
    B&D Logo
    Official B&D Accredited Dealer

    B&D Commercial Roller Doors Perth

    Heavy-duty, continuous-curtain steel commercial roller doors engineered for high-frequency access, warehouses, factories, and shopfronts across Perth.

    At a Glance

    Compare B&D Commercial Roller Doors

    Four B&D industrial rolling-door models cover heavy-duty warehouse openings, tight-headroom clearance, light commercial access and compact mini-warehouse use. Model codes and series are shown on each card.

    INDUSTRIAL & WAREHOUSE STANDARD

    B&D Traditional Industrial Model R2I · Series 2

    The benchmark commercial roller door for larger warehouses, factories, and heavy industrial applications.

    • Heavy-gauge 0.5mm steel curtain pressed into deep rigid profile
    • Nylofelt® running strips on both edges for smooth, quiet rolling
    • Waist-high slide locking bolt for high-grade security
    • Bottom weather seal protecting against dust, rain, and debris
    • Heavy-duty counter-balancing springs tested for 20,000 cycles
    • Optional Wind-Lock clips for high-wind cyclone compliance
    SQUARELINE & TIGHT HEADROOM

    B&D Squareline Industrial Model R3I · Series 3

    Engineered specifically for low-headroom installations where maximum opening height is required.

    • Squareline curtain profile requires minimal overhead roll clearance
    • Nylofelt® running strips eliminate metal-on-metal friction and noise
    • Heavy-gauge 0.5mm high-tensile steel curtain construction
    • Waist-high slide locking mechanism for intruder protection
    • Tested high-cycle counter-balance steel spring assembly
    • Optional Wind-Locking system for wind-prone locations

    B&D Traditional Industrial · R2I · Series 2

    Traditional Industrial Roller Doors

    The B&D Series 2 Roll-A-Door® is the ultimate commercial overhead door for warehouses, commercial shopfronts, and storage facilities. Custom manufactured in Western Australia from high-tensile 0.5mm steel for long-term reliability.

    • Heavy gauge 0.5mm steel curtain pressed into a deeper rigid profile
    • Smooth, quiet operation thanks to B&D's trademark Nylofelt® running strips
    • Complete lockability with waist-high slide locking bolts for site security
    • Sturdy high-cycle springs designed for 20,000 open and close cycles
    • Heavy-duty bottom weather seal preventing water, leaves, and dust ingress
    B&D Series 2 Industrial Roller Door
    0.5mm
    Heavy Gauge Steel
    20,000
    Tested Spring Cycles
    Nylofelt®
    Dual Running Strips
    ZINCALUME®
    & COLORBOND® Steel

    B&D Squareline Industrial · R3I · Series 3

    Squareline Industrial Roller Doors

    Perfect for tight headroom situations or where maximum opening height is required, the B&D Squareline Industrial (Series 3, R3I) is custom-made to suit every commercial opening.

    • Squareline profile minimizes headroom roll requirements in restricted spaces
    • Innovative Nylofelt® running strips ensure seamless, quiet daily operation
    • Heavy gauge 0.5mm steel curtain with optional Wind-Locking system
    • Waist-high slide locking bolt offers optimal protection from break-ins
    • High-tensile counter-balance springs engineered for 20,000 cycles
    B&D Series 3 Squareline Industrial Roller Door
    Compact
    Headroom Roll Size
    20,000
    Tested Spring Cycles
    Waist-High
    Slide Lock Bolt
    Wind-Lock
    Optional System

    Light Commercial & Compact Models

    Light Industrial & Mini Warehouse

    B&D Light Industrial Rollmasta (Roller Door)

    Product Code R2F · Series 2

    Light Industrial Roller Doors

    A lighter-duty commercial roller door from B&D's Rollmasta family, suited to light industrial and commercial access where a full heavy-duty industrial door is not required. The R2F family name is shown per Dynasty's confirmed B&D office pricing matrix.

    • Rollmasta-family light commercial roller door
    • Suited to light industrial and commercial access
    • Optional Wind-Lock clips for exposed high-wind sites

    B&D Mini Warehouse

    Product Code R1M · Series 1

    Mini Warehouse Roller Doors

    A compact Roll-A-Door Series 1 commercial roller door for mini-warehouse and small commercial storage openings where a smaller heavy-duty door is appropriate.

    • Compact Roll-A-Door Series 1 commercial roller door
    • Suited to mini-warehouse and small commercial storage openings
    • Optional Wind-Lock clips for exposed sites

    Wind-Lock is an optional wind-locking clip system available on applicable new B&D industrial roller doors. It must be specified when ordering the new door and cannot be retrofitted. Suitability depends on site and wind-region assessment — Dynasty confirms requirements during consultation. Confirm model-specific availability before specifying.

    Commercial Finishes & Colours

    B&D Commercial Roller Door Colours

    Explore the full range of genuine COLORBOND® steel colours and Zincalume® options for B&D industrial roller doors.

    Engineered with a five-layer design, COLORBOND® steel provides corrosion resistance and a durable baked-on paint finish tested for Australian conditions.

    Dover White™

    Dover White™

    Classic Cream™

    Classic Cream™

    Surfmist®

    Surfmist®

    Sandbank®

    Sandbank®

    Paperbark®

    Paperbark®

    Stone®

    Stone®

    Dune®

    Dune®

    Shale Grey™

    Shale Grey™

    Southerly®

    Southerly®

    Evening Haze®

    Evening Haze®

    Cove®

    Cove®

    Pale Eucalypt®

    Pale Eucalypt®

    Mangrove®

    Mangrove®

    Cottage Green®

    Cottage Green®

    Woodland Grey®

    Woodland Grey®

    Gully®

    Gully®

    Wallaby®

    Wallaby®

    Jasper®

    Jasper®

    Terrain®

    Terrain®

    Manor Red®

    Manor Red®

    Ironstone®

    Ironstone®

    Deep Ocean®

    Deep Ocean®

    Windspray®

    Windspray®

    Blue Gum®

    Blue Gum®

    Basalt®

    Basalt®

    Monument®

    Monument®

    Night Sky®

    Night Sky®

    Commercial Door Automation

    Openers for Your Commercial Roller Door

    Pair your B&D industrial roller door with a heavy-duty B&D or Grifco commercial motor for high-torque, smooth, and dependable daily operation.

    B&D CAD PowerDrive
    POWER DRIVE

    B&D CAD POWER DRIVE

    Product Code RDO-1v4 PD

    Capacity: Up to 16.5m²

    Standard Warranty: 7 years / 20,000 cycles

    Connectivity: Smartphone compatible

    • Powerful 600N motor
    • Soft start/stop for smooth operation
    • Auto-reverse safety system
    • LED courtesy light
    • Reliable rolling code technology
    10 Year Warranty

    Manufacturer's Warranty extended when purchased with any B&D Roll-A-Door.

    Download Brochure
    Grifco LR-Drive
    LIGHT COMMERCIAL

    GRIFCO LR-DRIVE

    Application: Commercial Roller Doors up to 28m²

    Warranty: 2 years / 10,000 cycles

    App: myQ® Compatible

    • Faster operation for commercial environments
    • Battery backup compatible
    • myQ® smart facility management ready
    • Heavy duty DC motor with soft start/stop
    • Security+ 2.0® technology
    View Spec Sheet
    Grifco E-Drive Series
    HEAVY INDUSTRIAL

    GRIFCO E-DRIVE SERIES

    Application: Heavy Industrial Roller Doors

    Warranty: 2 years / 100,000 cycles

    Power: Single or Three Phase

    • Purpose-built for high cycle industrial use
    • Available in high torque variants
    • Auto-chain engage mechanism (ACEM)
    • Main board with dedicated safety inputs
    • Absolute positioning encoder
    View Spec Sheet

    FREQUENTLY ASKED QUESTIONS

    Quoted garage door and opener installation, servicing and repair work is limited to the door, opener and their components. Structural work—including installing garage-door noggins—electrical work and other work outside that scope are excluded unless expressly included in the agreed written quote. This applies even where that work is necessary for the quoted job to proceed.

    Unless the owner specifies otherwise, installation includes taking down and removing the existing garage door and supplying and installing a new opener (motor). Removal requirements will be confirmed during quoting.

    Need B&D Commercial Roller Doors for Your Site?

    Contact our commercial garage door specialists today for expert advice, free on-site measures, and competitive quotes across Perth.

    Need a complete solution for your facility or warehouse? Explore our full range of heavy-duty systems from Perth's trusted commercial door supplier to find the right profile and motor for your site.

    Request a Quote