Skip to content
    Sectional DoorsBAL-Rated Sectional Doors
    B&D Logo
    BAL-MAZE® SYSTEM OVERVIEW

    Bushfire-Resistant Sectional Doors

    The B&D BAL-Maze® System is a CSIRO-tested garage door bushfire protection system, with the complete assembly's performance rated up to BAL-40.It is available as an optional upgrade for the documented B&D Panelift® sectional-door assembly tested with BAL-Maze® to AS 1530.8.1:2018.

    BUSHFIRE SAFETY

    Choosing a Garage Door for a Bushfire-Prone Area

    In bushfire-prone areas across Western Australia, your garage door is one of the largest openings in your home - and a potential entry point for embers and burning debris. Choosing a garage door system specifically tested and certified for bushfire protection is an important consideration for homes in areas assessed at Bushfire Attack Level (BAL) ratings under Australian Standard AS 3959:2018, Construction of buildings in bushfire-prone areas.

    B&D’s BAL-Maze® System has been designed to address this risk, providing a certified barrier and enhanced protection for your garage throughout the year, especially during Western Australia’s bushfire season.

    HOW DOES IT WORK?

    B&D BAL-Maze: A CSIRO-Tested Bushfire Protection System

    BAL-Maze® is an optional BAL-rated protection system upgrade available with compatible B&D sectional doors. The complete garage-door assembly has been tested by the Commonwealth Scientific and Industrial Research Organisation (CSIRO) to AS 1530.8.1:2018 and demonstrated performance up to BAL-40, as specified by AS 3959:2018.

    Unlike standard BAL-12.5-rated synthetic brush seals, the BAL-Maze® System uses a five-part interlocking steel-labyrinth system around the garage-door opening and panels. It is designed to help block flying embers and burning debris before they can enter the garage.

    1. STEEL JAMB SEALS

    Vertical steel seals span the full height of both sides of the garage opening.

    2. STEEL LINTEL SEAL

    A horizontal steel seal spans the top of the garage opening.

    3. PANEL SEALS

    Seals are fitted to each sectional-door panel, creating a labyrinth path that helps prevent embers from travelling through the gaps between panels.

    4. FLAME-RETARDANT BRISTLE SEALS

    Brush seals are assessed to meet a Flammability Index of up to 5.

    5. SELLEYS FLAMEFLEX SEALANT

    Fire-retardant Selleys FlameFlex Sealant is applied between major structural components and around side-seal and corner joints to help minimise openings through which embers and debris could enter.

    The BAL-Maze® System is available across all five compatible B&D Panelift® and Panelift® Icon™ profiles, with COLORBOND® steel, Knotwood®, Natural-Look and Timbergrain finishes available subject to the selected door, profile and current B&D availability.

    BUILDING REQUIREMENTS

    Understanding Your Garage Door's BAL Requirements

    When building a new home or completing relevant renovations in a designated bushfire-prone area, a site-specific Bushfire Attack Level assessment may be required. A suitably qualified assessor uses the methodology in Australian Standard AS 3959 to determine the property’s BAL rating and the corresponding construction requirements.

    If your property’s BAL rating or surrounding conditions have changed, speak with your local government, building surveyor or qualified BAL assessor to determine whether any requirements apply to your existing home or proposed building work. Where a BAL-rated garage-door assembly is required or selected, our team can help determine whether a compatible B&D sectional door fitted with the BAL-Maze® System is suitable for the opening.

    BAL-MAZE® STRUCTURAL REQUIREMENTS

    1. SOLID FIXING SURFACES

    Fixing surfaces must be suitable solid timber, masonry or steel.

    2. SQUARE-SET CEILING

    The ceiling-to-wall junction above the doorway must be square set, with no cornice obstructing the installation area.

    3. SUITABLE FLOOR REBATE

    Where a floor rebate is required, it must extend at least 100 mm beyond each side of the opening and at least 100 mm back from the fixing face.

    4. AUTOMATIC-OPENER NOGGINS

    Suitable noggin fixings are required for the automatic opener’s rail track. Their position varies according to the door height and selected rail configuration.

    Final structural suitability and dimensions must be confirmed on site before the door is ordered. Additional requirements may apply to the lintel, jambs, fixing thickness and selected door configuration.

    VIEW B&D SPRING FIXING & NOGGIN REQUIREMENTS (PDF)

    BAL-Maze® is tested for performance up to BAL-40 when supplied and installed as a complete compatible assembly in accordance with B&D requirements. It is not rated for BAL-FZ and should not be described as fireproof. Bushfire-resistant construction cannot guarantee that a building will survive every bushfire event.

    YOUR JOURNEY WITH DYNASTY

    FROM INITIAL ADVICE TO BAL-MAZE® INSTALLATION

    1

    CALL US TO DISCUSS YOUR PROJECT

    Tell us your suburb, BAL rating and the materials surrounding your garage-door opening. We may also ask for clear photographs to help with our initial review.

    2

    ON-SITE MEASURE & QUOTE

    Our team will attend the property to confirm the opening measurements, discuss suitable B&D sectional-door options and provide a project-specific quote.

    3

    BAL-MAZE® FEASIBILITY ASSESSMENT

    A trained BAL-Maze® garage-door installer will conduct a final assessment of the opening and supporting structure to confirm installation feasibility before the system is ordered.

    4

    ORDER & INSTALL

    Once the opening has been approved and the order confirmed, we will place the order with B&D and professionally install the new sectional door and BAL-Maze® System.

    NEED MORE INFORMATION ON BAL-RATED SECTIONAL DOORS?CALL OUR TEAM

    Quoted garage door and opener installation, servicing and repair work is limited to the door, opener and their components. Structural work—including installing garage-door noggins—electrical work and other work outside that scope are excluded unless expressly included in the agreed written quote. This applies even where that work is necessary for the quoted job to proceed.

    Unless the owner specifies otherwise, installation includes taking down and removing the existing garage door and supplying and installing a new opener (motor). Removal requirements will be confirmed during quoting.

    FAQs

    Bushfire-Resistant Sectional Door FAQs

    BAL-RATED SECTIONAL DOORS

    Discuss Your Bushfire-Resistant Sectional Door Requirements

    Talk to the Dynasty team about your property’s BAL rating, garage opening and compatible B&D Panelift® options. We can help you understand the BAL-Maze® installation process and arrange an on-site measure and quote.

    Explore our full range of sectional garage doors.

    Request a Quote